参考文献

[1] Liu J. Manufacturing and Packaging Trend for Swedish Microelectronics Industry[A]. High Dendsity Packaging and Component Failure Analysis[C], Shanghai, 2000:15.

[2] Rao R. Tummala. Fundaments of Microsystem Packaging[M]. New York: McGraw-Hill. 2001.

[3] Tummala R R. Packaging:past, present and future[A]. Proceeding of 6th International Conference on Electronic Packaging Technology[C], Shenzhen, China, August 30-September 2, 2005:3-7.

[4] Lau J, Wang C P, Prince J L, et al. Electronic Packaging-Design, Materials, Process, and Reliability[M]. New York:McGraw-Hill, 1998.

[5] 况延香，朱颂春.三级微电子封装技术[J].电子工艺技术，2005，25（3）：134-137.

[6] 鲜飞.BGA技术与质量控制[J].电子与封装，2004，4（3）：28-32.

[7] 杨兵，刘颖.BGA封装技术[J].电子与封装，2003，3（4）：6-13.

[8] 中国电子学会生产技术学分会丛书编委会.微电子封装技术[M].合肥：中国科学技术大学出版社，2003：1-10.

[9] John H.Lau, Shi-Wei Ricky Loe.芯片尺寸封装—设计、材料、工艺、可靠性及应用[M].贾松良，王水弟，蔡坚，等译.北京：清华大学出版社，2003.

[10]云振新.圆片级封装技术及其应用[J].电子与封装，2004，4（1）：19-23.

[11] 成立，王振宇，祝俊，等.圆片级芯片尺寸封装技术及应用综述[J].半导体技术，2005，30（2）：38-43.

[12]高尚通，杨克武.新型微电子封装技术[J].电子与封装，2004，4（1）：10-15.

[13] Topper M, Fritzsch T, Glaw V, et al. Technology requirements for chip-on-chip packaging solutions[A]. Proceeding of the 55th Electronic Components and Technology Conference[C], Orlando, Florida, May 30-June 3, 2005:802-808.

[14]田民波.电子封装工程[M].北京：清华大学出版社，2003.

[15] Larson S E, Slaby J. Comparison of various substrate technologies under steady state and transient conditions [J]. Integr Electron Syst Sector, 2004(2):648-653.

[16] Liang Q, Zhou H P, Fu R L, et al. Thermal conductivity of AlN ceramics sintered with CaF2 and YF3 [J]. Ceram Int, 2003, 29:893-897.

[17] Li X L, Ma H A, Zuo G H, et al. Low temperature sintering of high density aluminium nitride ceramics without additives at high pressure[J]. Sci Mater, 2007, 56 (12):1015-1018.

[18]中国人民解放军总装备部电子信息基础部.微电子器件试验方法和程序：GJB548B-2005 [S].北京：总装备部军标出版发行部，2005.

[19] Jacobson M, Sangha S P S. Future trends in materials for light weight microwave packaging [J]. Microelectronics Int, 1998, 15(3):47-52.

[20] Chien C W, Lee S L, Lin J C, et al. Effects of Si size and volume fraction on properties ofAl/Sip composites[J]. Materials Letters, 2002, 52:334-341.

[21] Jacobson M, Sangha S P S. Future trends in materials for light2 weight microwave packaging [J]. Microelectronics Int, 1998, 15(3):47-52.

[22]中国人民解放军总装备部电子信息基础部.混合集成电路通用规范：GJB2438B-2017 [S].北京：总装备部军标出版发行部，2017.

[23]杨邦朝，张经国.多芯片组件（MCM）技术及其应用[M].成都：电子科技大学出版社，2001.

[24]盖红星，王静，王宝友.多芯片组件（MCM）技术[J].集成电路，2008，（5）：26-29.

[25] Whaley D R. Sixly-percent-efficient Miniature C-Band vacuum Power Booster for the Mierowave Power Module[A]. IEEE Trans. Plasma Sci. [C], 1998, 26(3):912-921.

[26] Bhattacharjee S, Booske J H, Kor C L, et al. Folded waveguide traveling-wave tube sources for terahertz radiation[A]. IEEE Trans. Plasma Sci. [C], 2004, 32 (3):1002-1014.

[27] Gerum W, Bruck M, Fischer G. Space Qual ified Low/High-Power Radar TWTs[A]. IEEE Transactions on Electron Devices[C]. 2005, 52(5):669-672.

[28] Theiss A J, Lyon D B. High-power Ka-band TWTs for airborne radars[A]. IEEE Aerospace and Electronic Systems Magazine[C]. 1995, 10(11):33-36.

[29]欧阳勤.空间行波管[J].真空电子技术，2003（2）：29-32.

[30] Barker R J, Schamiloglu E. High-Power Microwave Sources and technologies[A]. IEEE Press, NewYork, 2001.